Introduction :

• NTC stands for “Negative Temperature Coefficient. NTC thermistors are resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature. They are primarily used as resistive temperature sensors and current-limiting devices.

  Need to measure something damp? This metal head precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets cooler. These are often used for air conditioners, water lines, and other places where they can get damp. The PVC coating of the wires is good up to 105 °C so this isn’t good for very hot stuff.

  Features:

  • High sensitivity, rapid response.
  • Compact structure, easy installation, good water resistance.
  • The use of wide temperature range, good stability, high reliability.

  SPECIFICATIONS:

  • Stainless steel sheath and waterproof
  • Measurement range: -4°F to +200°F (-20°C to 105°C)
  • Length of wire: 1 meter
  • Size of probe: 4 x 20 mm
  • Output: 2 wires with 2-socket connector  (with XH2.54 terminal)
  • Type: NTC 10k ±1% 3950
  • B-constant : 3380K +/- 1%
  • Typical Dissipation Constant: 5mW / °C
  • Probe insulation: >100 MOhm
  • Stress sustain: 9.8N (1kgF) for 1 minute no deformation